6.5TD C/K Trucks > Injectors > SSDiesel Stock Injector Kit
SSDiesel Stock Injector kit for all 6.5's, all vehicles, all years.
$25 REBATE AVAILABLE*
SSDiesel 6.5 Stock injectors for all 6.5's, all vehicles, all years, Turbo and Non-Turbo (NA)
Reman in the US by American workers earing a living wage.
Sold as a set of 8. NO CORE DEPOSIT REQUIRED.
6.5 injectors have a design life of 100K miles and are a routine maintenance item often overlooked. Symptoms of worn injectors are hard starting, very smokey start-ups overnight, misfiring, loss of power and most common symptom, POOR FUEL MILEAGE. Worn injectors can damage your engine as with age they tend to leak fuel overnight into the cylinders. This will wash the lubricant off the pistons and cylinders creating metal to metal contact and severe engine damage. Running injectors past 100K miles is like playing Russian Roulette with your engine! Only the highest quality American made components are used in these injectors and install kit.
Every injector is tested twice on a Kent-Moore Model B nozzle tester for spray pattern, pop pressure and leakage prior to shipping which virtually eliminates complaints.
Installation kit p/n ssd-2120 and instructions INCLUDED free of charge.
Injector install/removal tool sold separately under the "tools" category as p/n ssd-630. Its specially designed to prevent breakage of the return nipples during install.
For more power and better mileage, go with our Marine Injector kit sold separately under this category as p/n ssd-9311.
$25 REBATE AVAILABLE. Send us your old injectors for a $25 store credit good on your next purchase. Rebate slip included.
Injectors are easy to change by even a weekend mechanic. They are no harder then changing spark lugs on a gas engine. The turbo will need to be removed for access, but thats only held down by 4 bolts and a few clamps.
Only handle injectors with clean hands and leave the protective caps on until the last possible moment, as a spec of dirt in an injector will cause a misfire of knock until the dirt passes or is removed by cleaning the new injector.
Do not bend the injector steel tubes as the internal coating amy flake off and also foul an injector. Just gently move aside.
Note: The installation kit shown only comes with 2 clamps for a reason! These are a new style high temp teflon hose which is push-on style, no clamps needed. The 2 clamps are for use with the rubber end caps shown.