SSDiesel TRUE Premium Marine Injectors for all 6.2-6.5 H1 HUMMERS 85-2005
$25 REBATE AVAILABLE*
FREE PRIORITY MAIL SHIPPING TO 48 STATES
From SSDiesel SupplyTM, High Performance Premium Marine Injectors. Adds 40hp to your 6.5 diesel. These high quality injectors are reman in the USA to true marine specs. Included in this kit are 8 Marine Injectors, and an installation kit which includes all gaskets hoses and clamps required to install. Please see install kit ssd-2120 (included) for details about that kit and installation tips rergarding the new style hose.. Only the highest quality American made components are used in these injectors and install kit.
6.5 Injectors have a design life of only 100K miles and are a routine maintenance item on all diesels. Usually right after that mileage and performance drops off sharply. Symptoms of failing injectors are knocking, rough running, poor mileage, and excessive smoking and "chugging" on an overnight start due to fuel leaking into the cylinders. This excess fuel also washes off lubricant off the cylinder walls, and will destroy the engine, so don't hesitate to change routinely every 100K.
Every injector is tested twice on a Kent-Moore Model B nozzle tester for spray pattern, pop pressure and leakage prior to shipping which virtually eliminates complaints.
IN STOCK, READY TO SHIP!
No Core deposit required!
Includes Instructions and Install kit ssd-2120 free of charge.
Injectors are easy to change by even a weekend mechanic. They are no harder then changing spark lugs on a gas engine, just a little harder to get at.
Only handle injectors with clean hands and leave the protective caps on until the last possible moment, as a spec of dirt in an injector will cause a misfire of knock until the dirt passes or is removed by cleaning the new injector.
Do not bend the injector steel tubes as the internal coating amy flake off and also foul an injector. Just gently move aside.
I recently had a customer try to stretch the life of his injectors and got as far as 175K miles and cracked 2 pistons due to bad injectors. He bought a new engine.
Why not upgrade to add HP! Operating efficiency is also increased and will usually result in an increase in mileage.
Our Injector install/removal tool ssd-630 comes in handy. Available in the "tools" category. This special tool is designed to not damage the return nipples during install.
Works well in all 6.2-6.5 H1 HUMMERS 85-2005. There will be less of a power gain however in non-turbo applications.
*$25 REBATE AVAILABLE. Send us your old injectors for a $25 store credit good towards your next purchase. Rebate slip included.
Note: The installation kit shown only comes with 2 clamps for a reason! These are a new style high temp teflon hose which is push-on style, no clamps needed. The 2 clamps are for use with the rubber end caps shown.
NOTE: factory order item