6.5TD C/K Trucks > Performance Parts > 6.5 TD Premium Marine Injector set
High Performance True Premium Marine Injector kit for all 6.5's 92+
$25 REBATE AVAILABLE*
From SSDiesel SupplyTM, High Performance Premium Marine Injectors. Adds 40hp to your 6.5TD. These high quality injectors are reman in the USA to true marine specs. Included in this kit are 8 Marine Injectors, and an installation kit which includes all gaskets hoses and clamps required to install. Please see install kit ssd-2120 (included) for details about that kit and installation tips rergarding the new style hose. Only the highest quality American made components are used in building these injectors and install kit.
Installation instructions included!
6.5 Injectors have a design life of only 100K miles and are a routine maintenance item on all diesels. Usually right after that mileage and performance drops off sharply. Symptoms of failing injectors are knocking, rough running, poor mileage, and excessive smoking and "chugging" on an overnight start due to fuel leaking into the cylinders. This excess fuel also washes off lubricant off the cylinder walls, and will destroy the engine, so don't hesitate to change routinely every 100K.
Every injector is tested twice on a Kent-Moore Model B nozzle tester for spray pattern, pop pressure and leakage prior to shipping virtually eliminating complaints.
Also check our FAQ section for some important installation tips on injectors.
No Core deposit required!
$25 REBATE AVAILABLE. Send us your old injectiors for a $25 store credit good on your next purchase. Rebate slip included.
I recently had a customer try to stretch the life of his injectors and got as far as 175K miles and cracked 2 pistons due to bad injectors. He bought a new engine.
Why not upgrade to add HP! Operating efficiency is also increased and will usually result in an increase in mileage.
Our Injector install/removal tool ssd-630 comes in handy. It is sold separately in the "tools" category. This special tool is designed to not damage the return nipples during install.
Also works well in non-turbo 6.5's and all 6.2's excluding 1982 trucks with course thread heads. There will be less of a power gain however in non-turbo applications.
Note: The installation kit shown only comes with 2 clamps for a reason! These are a new style high temp teflon hose which is push-on style, no clamps needed. The 2 clamps are for use with the rubber end caps shown.
NOTE: factory order item